TRANSITIONS® Modular Entry Ramp
Ask a QuestionThe TRANSITIONS® Modular Entry Ramp is perfect for doorways to create a smooth, sturdy, and seam-free surface for wheelchair, scooter, walker, and cane users. It is made with high-strength aluminum that will never rust or corrode and has an extruded slip-resistant surface for superior traction. Ideal for doorways, sliding glass doors, and raised landings. It is lightweight and easily transported from one place to the next for added convenience. Browse through the tabs below to learn more.
Related Products
These products may also interest you
This product also resides in the following industries:
These buttons will take you to the respecitve categoryFeatures
- Made of Aluminum:
Made from high-strength aluminum that will not rust or corrode and can support up to 700 pounds. - Slip-resistant Surface:
Features a safe, extruded slip-resistant surface for superior traction. - Adjustable Flap:
This pivoting flap attaches to the top of the ramp to provide ¼” of additional adjustability. - Modular Design:
Easily add or remove interchangeable extensions as needed to accommodate your threshold. Available in 1, 1.5, 2, 3, 4, 5, and 6 inch heights. See specifications tab for accommodating height ranges when using the Adjustable Flap. - Pre-drilled Slots:
Holes are pre-drilled in the foot section and Adjustable Flap for anchoring. - Made in the USA and carries a lifetime warranty.
Specifications
TMER1 | TMER1.5 | TMER2 | TMER3 | TMER4 | TMER5 | TMER6 | |
|---|---|---|---|---|---|---|---|
Made of aluminum | √ | √ | √ | √ | √ | √ | √ |
Slip-resistant surface | √ | √ | √ | √ | √ | √ | √ |
Modular design | √ | √ | √ | √ | √ | √ | √ |
Usable size ( L x W x H ) | 6.5" x 34" x 1" | 9.5" x 34" x 1.5" | 12" x 34" x 2" | 17" x 34" x 3" | 22.25" x 34" x 4" | 27.5" x 34" x 5" | 32.75" x 34" x 6" |
Usable height range * | .75" - 1.25" | 1.25" - 1.75" | 1.75" - 2.25" | 2.75" - 3.25" | 3.75" - 4.25" | 4.75" - 5.25" | 5.75" - 6.25" |
Weight ** | 3 lbs. | 5 lbs. | 5.5 lbs. | 8 lbs. | 11 lbs. | 15 lbs. | 20 lbs. |
Weight capacity | 700 lbs. | 700 lbs. | 700 lbs. | 700 lbs. | 700 lbs. | 700 lbs. | 700 lbs. |
For wheelchairs & scooters | √ | √ | √ | √ | √ | √ | √ |
NOTE: Weights and dimensions are approximate and subject to change.
* Consult your equipment's owner guide for proper degree of incline. Never exceed its recommendations.
** Weights are approximate and may vary.
For additional specs and dimensions see “Documents”
Documents
- TRANSITIONS Modular Entry Ramp Technical Specifications
- Transitions Modular Entry Ramp Instr
- TRANSITIONS Brochure
- Lifetime Warranty
- Although it's our intent to keep all documents current, some documents are subject to change and may take time to update. If you are unsure whether you have the most current revision or if your product is different, contact our technical support.
FAQ
-
Does this product require assembly?
Yes, the sections slide together and are secured in place by provided screws.
-
Does the ramp butt up to the opening or is there a lip that sits on top of the door track?
The ramp can do either or. There is a top pivoting flap that provides an additional .25” of adjustability and can be slid in or kept out. If in, the ramp would be set against the door threshold and the flap would rest on top of it. If the flap is kept out, the ramp would butt up against the door threshold and wouldn’t interfere with door styles such as a sliding glass door with a track.
-
My door threshold is 3.5" high. Should I order a 3" or 4" ramp?
Because this is in between sizes, consider purchasing a TRANSITIONS® Angled Entry Ramp, which is also made of aluminum and has adjustable feet to meet your threshold rise requirements.
-
How do I keep the ramp from moving around?
Pre-drilled holes are available for anchoring at both the top and bottom of the ramp. Anchoring hardware is not provided.
Videos
Product Overview - TRANSITIONS® Modular Entry Ramp | EZ-ACCESS
We're At Your Service
Talk to a Representative Now!
Tools to Help You Get What You Need
